@Reuters: Austria allows broad lifting of lockdown, but many provinces hold off https://t.co/qREvyenqNe https://t.co/fPauqOyXbd

2021.12.08 13:07 -en- @Reuters: Austria allows broad lifting of lockdown, but many provinces hold off https://t.co/qREvyenqNe https://t.co/fPauqOyXbd

@Reuters: Austria allows broad lifting of lockdown, but many provinces hold off https://t.co/qREvyenqNe https://t.co/fPauqOyXbd submitted by -en- to newsbotbot [link] [comments]


2021.12.08 13:07 95emink Hvordan er det FORTSATT folk som ikke bruker munnbind på toget??

Er folk blinde eller dumme? Sitter på toget hjem fra jobb nå, jeg må fysisk på jobb og jeg kjører ikke selv så velger å ta toget. Det er uten feil ALLTID noen som sitter på setet sitt, i rushtiden, og de sitter å hoster og harker og nyser og snørrer og faens oldemor jeg blir gal. Eller så snakker de med venner og kompiser og ler og koser seg og jeg blir faktisk forbanna. Vi har holdt på med dette her lenge nå, er folk så lei at de gir faen i alle andre? Jeg vil ikke bli syk!
submitted by 95emink to norge [link] [comments]


2021.12.08 13:07 WolfBoy80 What license do I need to be for the W12 Mercedes F1?

I am new to iracing and am still in rookie. I love f1 and want to race in the new w12 Mercedes. Do I need a better license do races?
submitted by WolfBoy80 to iRacing [link] [comments]


2021.12.08 13:07 DanK_BuT_IronicallY 🗿

🗿 submitted by DanK_BuT_IronicallY to shitposting [link] [comments]


2021.12.08 13:07 tempecreekvineyard Guys im 150 hours from getting monitized. Can i get a push?

Guys im 150 hours from getting monitized. Can i get a push? submitted by tempecreekvineyard to AdvertiseYourVideos [link] [comments]


2021.12.08 13:07 HarleyArchibaldLeon I mean... She did what she was told.

I mean... She did what she was told. submitted by HarleyArchibaldLeon to SuddenlyIncest [link] [comments]


2021.12.08 13:07 RNLittleRabbitInLove 東京都で新たに21人の感染、1人死亡

submitted by RNLittleRabbitInLove to GiinSenkyo [link] [comments]


2021.12.08 13:07 twirlingfairy is this okay to eat? (more in replies)

is this okay to eat? (more in replies) submitted by twirlingfairy to Bacon [link] [comments]


2021.12.08 13:07 Dozer736 US House FCS talking about Digital Assets right now

https://youtu.be/4oOTvtupND8
submitted by Dozer736 to Bitcoin [link] [comments]


2021.12.08 13:07 stocktime6 $RPNRF Growing product portfolio: Dedicated to the development and distribution of premium, evidence-based health and wellness brands across the globe with a focus on in-house development of cutting-edge natural science.

$RPNRF Growing product portfolio: Dedicated to the development and distribution of premium, evidence-based health and wellness brands across the globe with a focus on in-house development of cutting-edge natural science.
Rapid Nutrition shares a wealth of award-winning products with consumers who are passionate about innovations that are “made by nature, refined by science.” https://www.rnplc.com/
submitted by stocktime6 to 10xPennyStocks [link] [comments]


2021.12.08 13:07 Fred_Dibnah Google have started shipping out the Bose 700 headphones in the UK (Pre-order deal on Pixel 6)

Google have started shipping out the Bose 700 headphones in the UK (Pre-order deal on Pixel 6) submitted by Fred_Dibnah to pixel_phones [link] [comments]


2021.12.08 13:07 Long-Disaster-5955 Sant rampal ji, dowry free marriage #संतरामपालजीकेउद्देश्य संत रामपाल जी महाराज जी का उद्देश्य है कि जाती पाती का भेद मिटाना क्योंकि हम एक ही परमात्मा के बच्चे है अधिक जानकारी के लिए संत रामपाल जी महाराज youtube channel को visit करें

Sant rampal ji, dowry free marriage #संतरामपालजीकेउद्देश्य संत रामपाल जी महाराज जी का उद्देश्य है कि जाती पाती का भेद मिटाना क्योंकि हम एक ही परमात्मा के बच्चे है अधिक जानकारी के लिए संत रामपाल जी महाराज youtube channel को visit करें submitted by Long-Disaster-5955 to SaintRampalJi [link] [comments]


2021.12.08 13:07 theophys2005 Dual-z-axis dual-extruder setup on Ender 3: ideas?

Hi friends,
I have been fancying this idea for a while: install a second z-axis frame with completely separate z-motor, lead screw, x/e-stepper and hotend to provide for independent dual-extruder setup.
Advantages as I see them: - speed/reliability/backwards-compatibility: this does not add to the weight of any hotend, so single-material prints can be as fast as they were before (actually, in every way as they were before: the second hotend just moves all the way out when not in need.) - versatility: one of the hotends can be Bowden for speed; the other can be direct extruder for more finicky materials - can be easily retrofitted to an existing Ender 3 hardware wise.
Disadvantages: - tricky extruder alignment problem. Most likely, frequent alignment calibration will be needed (with recalibration every time temperatures change). Very precise assembly will be needed so that y-alignment persists across the entire z-range. So this set-up is probably not for the artistic multicolor prints but rather "soluble support" scenario, or something like "rigid part with elastic inserts as a single job" kind of thing. - reduction of the effective y-range for the added extruder.
Now my question is: are there Ender 3 compatible mainboards and firmware capable of handling this set-up? Will need, ideally, 7 stepper drives (5 is the absolute minimum) and more-than-normal endstops (ideally, 6 to have top z-stops too, to move unneeded hotends out of the way). Has anyone ever done something like this?
submitted by theophys2005 to ender3 [link] [comments]


2021.12.08 13:07 WarningConfident My band director moved my seat and I don’t know why

I always go to the band room during my lunch period to do my school work or eat there and I would sit in the same seat I sit during my actual band period. I’ve been sitting in the same seat for my lunch class in the band room for 4 months now and my director randomly moved my seat. Before I could even ask why they told me because I mess with their head. I have no clue what that means nor why I “mess with their head” but i awkwardly accepted this change and moved my seat. I sat in a different seat and my teacher told me to not sit in that seat. Then where the hell do you want me to sit?? I politely asked “Then where else would I sit?” The told me to sit in the very back of the class. What?? Why? I mean I’m just going to do school work but why am I in the back of the class?
And my friend said during that time I was sitting in my new seat the director was staring at me while they were conducting for a whole 5 measures. I didn’t know why because I was minding my own business doing my work. Should I ask why did they move me? Was there something that I did? Because people there’s people that come during their lunch period too and sit in their seat but I get moved?.
submitted by WarningConfident to marchingband [link] [comments]


2021.12.08 13:07 Elfalien the truth revealed

the truth revealed submitted by Elfalien to ufomemes [link] [comments]


2021.12.08 13:07 EvanGooch Starting at just $5 dollars. Brand new NFTs. Get yours NOW

Starting at just $5 dollars. Brand new NFTs. Get yours NOW submitted by EvanGooch to NFTmarket [link] [comments]


2021.12.08 13:07 usuario_do_redd I discovered this comment in the video where him and the guy with a tree for his logo are in the car talking about cats

I discovered this comment in the video where him and the guy with a tree for his logo are in the car talking about cats submitted by usuario_do_redd to Schaffrillas [link] [comments]


2021.12.08 13:07 JellyBean_Burrito Tub Drain 🛁

submitted by JellyBean_Burrito to Home [link] [comments]


2021.12.08 13:07 Aftrekplek Nutters: “pits are innocent wiggle butts!” Also nutters:

Nutters: “pits are innocent wiggle butts!” Also nutters: submitted by Aftrekplek to BanPitBulls [link] [comments]


2021.12.08 13:07 Saphirar Skræddersyet sko

Goddag Denmark.
Jeg er træt af at skulle købe nye sko hver andet år fordi de bliver slidt op eller er lavet af dårlige materialer.
Jeg er derfor på udkig efter et Dansk firma der laver deres egne sko efter kundens mål, med fokus på kvalitet og holdbarhed.
Jeg har et problem i og med at jeg har meget brede fødder. Hvilket vil sige at størstedelen af de maskinelavet sko man kan købe ikke passer særlig godt og sygning ryger efter et år eller 2. Derudover er mine fødder ikke den samme størrelse, min højre fod er en smule større end venstre.
Jeg leder derfor efter et firma der specialiser i at lave sko der passer kunden. Ligesom de firmaer der skræddersyer habbit jakker.
Jeg er villig i at spare penge sammen til at købe hvad det nu end må koste, da jeg er træt af at skulle bruge 1000 kroner hvert år eller hvert andet år på et par sko. Så hellere noget der kan holde 5-10 år og som kan repareres hvis nødvendigt.
På forhånd tak.
p.s. jeg er en mand.
submitted by Saphirar to Denmark [link] [comments]


2021.12.08 13:07 Available_Wishbone_7 Play 35 NEW XBOX demos BEFORE release! Enjoy and SUBSCRIBE to see more!

Play 35 NEW XBOX demos BEFORE release! Enjoy and SUBSCRIBE to see more! submitted by Available_Wishbone_7 to IncreaseYTWatchTime [link] [comments]


2021.12.08 13:07 Mynam3wastAkn I can’t believe they’re advertising this game to kids!

I can’t believe they’re advertising this game to kids! submitted by Mynam3wastAkn to mildlyinfuriating [link] [comments]


2021.12.08 13:07 The_Lobster6 GOLF LE FLEUR * Website updated

GOLF LE FLEUR * Website updated submitted by The_Lobster6 to Golfwang [link] [comments]


2021.12.08 13:07 Fit-Ad271 What do you expect from 2022?

A quick Question guy's what do you expect about 2022:
View Poll
submitted by Fit-Ad271 to generationstation [link] [comments]


2021.12.08 13:07 LionelVerney She needs her bed, blankie and shark while I work.

She needs her bed, blankie and shark while I work. submitted by LionelVerney to Blacklabs [link] [comments]


http://sushi-alder.ru